FuseFX Base Coat 1oz Kit M-109 humanskeletonskulls These particulate filters are designed

These particulate filters are designed to be easily replaced for a cost effective solution

and fills voids

Always mix epoxy resin and hardener as close as you can to the recommended ratio

17 inches of clearance from the cutting wire to the rear post

5 mil polyethylene-coated fabric

FuseFX Base Coat 1oz Kit M-109 humanskeletonskulls These particulate filters are designed109 Basecoat is used to promote a better bonding surface for painting when using a shore 20A or higher harder silicone. 109 Basecoat is brushed or poured into an open mold to form a surface "skin" prior to filling the mold with harder silicone. Can also be used as a soft skin encapsulator for Gel filled silicone appliances. Must be used with 109 "Basecoat Part A" NOT normal FuseFX Part "A".