CRL 6-1/2" x 6-1/2" Square Base Plate Base Shoe Cladding Glazing Thickness (Inches) 3/8

Glazing Thickness (Inches) 3/8

SPECIFICATIONS:For Use With: 3/4" (19 mm) Tempered GlassDo Not Use With: Annealed or Raw GlassGlass Fabrication Required:One 7/8" (22 mm) Diameter Hole Per Glass FasteningTemplates:Available on Request for Each FittingProduct Warning:Do not use with annealed or raw glass

a drop bolt must be used

Ball and Socket Joint Allows any Direction of Tilt at 6 Degrees

Black Color Rigid Push-In Glazing Vinyl for Use with Aluminum Windscreen Posts and Bottom Rails

CRL 6-1/2" x 6-1/2" Square Base Plate Base Shoe Cladding Glazing Thickness (Inches) 3/8For Use with Our 4" x 4" (102 x 102 mm) Vertical Posts Seven Standard Colors, Plus Unfinished Chromate This CRL Square Base Plate screws into our 4" x 4" (102 x 102 mm) Vertical Post raceways, and is countersunk to accept four Cat. No. BPS112 Base Plate Screws. Attach to substrate with Concrete Anchors or Lag Bolts. Use Stainless Steel Washers (WSHR1) and Color Match Bolt Cover Buttons (BTN1) to add a finished look. One each Moisture Barrier Gasket