CRL 90 Degree Corner Horizontal Internal Splice for 4" Oval Cap Rail F Series Top Rails and Components You can also use these

You can also use these as Stabilizing Sleeves to terminate a hand rail into a wall or post by anchoring the aluminum sleeve prior to sleeving the hand rail into place

Sizes to Fit All CRL Base Shoe Series

2 Sets per linear foot required

NOTE: You must cut 5/8" (16 mm) off the length of the Spacing Block when used with B5L Series Low Profile Base Shoe

Blades Work with Our Original Tapers and TAPER-LOC® 'X'

CRL 90 Degree Corner Horizontal Internal Splice for 4" Oval Cap Rail F Series Top Rails and Components You can also use theseReady to Install Provides Proper Alignment for Extruded Aluminum Cap Railing at Splice Locations Custom Angles are Also Available CRL 90 Horizontal Internal Splice Sleeves are used to connect and provide proper alignment between our Extruded Aluminum Cap Rails. The Splice Sleeves must be compressed to fit inside the Top Cap. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond at all connections.