Proflow Supercharger Spacer Kit, Suit GM LS3/LSA 6.2L Engines, Thermoplastic, Pa Clamps STRAIGHT SS BRAIDED HOSE END

STRAIGHT SS BRAIDED HOSE END -08AN

Part Number : RTS70120CH

Suit carburetted applications using EFI style pump up to 150GPH (570 LPH) Note pump must produce a mnimum of 45psi in order for regulator to function as intended Adjustable from 4-13 PSI Fuel pressure rise on a 1:1 ratio with boost E85 and alcohol compatible 2x 1/8 NPT gauge port 1x Inlet Port -10AN 2x Outlet Ports -06AN 1x Return Port -08AN

The 2 PSI version is usually used when the master cylinder is lower than the brake calipers

The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs

Proflow Supercharger Spacer Kit, Suit GM LS3/LSA 6.2L Engines, Thermoplastic, Pa Clamps STRAIGHT SS BRAIDED HOSE ENDPart Number : PFELSA S1 These LSA LS3 spacer plates bolt in between the intake manifold supercharger and cylinder head to reduce heat transfer between the supercharger and engine. This in turn reduces supercharger induction temperatures by decreasing heat soak from the engine. This will increase the thermal efficiency of the supercharger and will provide more HP gains due to the decreased temperature of the condensed air entering the cylinder. These