IERC EMPIRE LINK MOUNT BRACE OPTIONS:76mm WIDE -30mm GAP SPACING Servo will need to be

Servo will need to be pushed forward to avoid contact with motor

You will need 4 × M3 x 8mm screws to mount the 3D-printed pieces to the sliders (hardware not included)

x6 TAPPED HOLES TO ACCEPT M3 SCREWS

WATCH ATTACHED VIDEO ( FORWARD TO MINUTE 2)

XTRA CAB FRONT BUMPER WILL WORK WITH OUR CLASS1 CHASSIS AND ANY AFTERMARKET OR RTR CHASSIS WITH A SMALL DROP DOWN LIKE AXIAL SCX10ii

IERC EMPIRE LINK MOUNT BRACE OPTIONS:76mm WIDE -30mm GAP SPACING Servo will need to bePLEASE READ FULL DESCRIPTION THESE 3D PRINTED LINK BRACES WILL HELP STIFFEN UP THE FRAME WHEN RUNNING THE UPPER LINKS MOUNTED DIRECTLY TO THE CHASSIS THE HOLLOW BALL OPENING IS MADE FOR A 7mm WIDE BALL (TRAXXAS ROD END HOLLOW BALL) THE BLOCK AT THE CENTER OF THE BRACE IS 10mm, 20mm & 30mm WIDE YOUR LINKS WOULD SIT AT 17mm, 27mm OR 37mm APART CENTER TO CENTER OF THE HOLLOW BALL BRACE WIDTHS: IF YOU RUN A OUR STANDARD 78mm SKID PLATE YOU WILL NEED THE