Beer Faucet Shank | Stainless | 4" | Intertap® | NukaTap® itemID-46521 It can also be used

It can also be used with Nitrogen or Argon tanks with the optional CGA320 x CGA580 Adapter

and easily stands up to the rigorous demands of a professional environment

We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole

5" from the mounting holes to the tip of the valve

We recommend leaving the reservoir temperature at or above 38°F when using water only

Beer Faucet Shank | Stainless | 4" | Intertap® | NukaTap® itemID-46521 It can also be usedComes with a back nut, plastic collar, hex nut, and a 1 4" barb. Requires a 1" hole saw for installation. When set in place, the shank will only have about 2 1 2" of length to pass through your wall or fridge door, due to the length of the collar and back nut. Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To