MicoAir TRS 2.4GHz RC + Telemetry 2-in-1 System — 1W TX Module & SBUS Receiver for ArduPilot / PX4 Model:TRS TX Module & Receiver and set the protocol to

and set the protocol to receive RC data: SERIALn_PROTOCOL=23 and change SERIAL6 _Protocol to something other than '23'

and power with the onboard button and LED indicators — see the button configuration guide and 48-channel frequency table

This is the first one which combine the STM32F405 with the high performance IMU sensor BMI088

MOSFET RDS(on): 1

Channels 1-8 support DShot/bi-directional DShot

MicoAir TRS 2.4GHz RC + Telemetry 2-in-1 System — 1W TX Module & SBUS Receiver for ArduPilot / PX4 Model:TRS TX Module & Receiver and set the protocol toOverview The MicoAir TRS combines your radio control link and telemetry data link in one 2. 4GHz LoRa system one TX module in your radio, one 2. 5 g receiver on the aircraft, and a single encrypted FHSS link carrying both your stick inputs (up to 150 Hz) and bidirectional MAVLink telemetry (up to 8 KB s) at the same time. A conventional long range build needs two separate radio systems: an RC link (like ELRS) plus a dedicated telemetry radio. That