HeatBoard Fusion 1200×600mm Structural Two-Part Chipboard and Fibre Cover Board UFH System – P6 Chipboard, Foil Cover Board, 28mm Build-Up, Joist-Direct, No Screed solar Reina Coneva RND-CNV05100A Anthracite Horizontal

Reina Coneva RND-CNV05100A Anthracite Horizontal Radiator 1000mm x 550mm

Smart multi-zone heating hub for Neo thermostat system

backup power and three-phase unbalanced systems

A linked isolator switch with at least 3 mm contact gap per pole is also required

Both figures assume adequate boiler output and a start temperature of 15°C

HeatBoard Fusion 1200×600mm Structural Two-Part Chipboard and Fibre Cover Board UFH System – P6 Chipboard, Foil Cover Board, 28mm Build-Up, Joist-Direct, No Screed solar Reina Coneva RND-CNV05100A Anthracite HorizontalThe HeatBoard Fusion is a structural two part underfloor heating system designed for suspended timber floors. It combines a 22mm P6 load bearing routed chipboard base with a 6mm moisture resistant foil backed fibre cover board, giving a total build up of just 28mm above the joist. Unlike overlay systems, Fusion replaces the standard floor deck entirely laying directly onto joists at up to 600mm centres with no separate chipboard or plywood subfloor