Filaments Depot Grey HTPLA pla 3d870 You can increase the temperature

You can increase the temperature in increments of 10-15 degrees Celsius (18-27 degrees Fahrenheit) every 10-15 minutes until the desired annealing temperature is reached

First layer usually 5°C-10°C higher than subsequent layers

Both PLA resin and colorant are food-grade material

which ensures that it can withstand stress and strain without breaking or cracking

Retraction Distance: 1mm

Filaments Depot Grey HTPLA pla 3d870 You can increase the temperatureFilaments Depot HT( High Temperature) premium PLA is high heat , high viscosity resin. HTPLA is high grade premium high temperature PLA that withstand High Temperature and high viscosity resin To achieve the crystalline state , HTPLA 3d printed part need to be heat treated in the oven (heat treatment must be done after 3D printing process) Filaments Depot team have followed the following process to heat treat the following parts as shown in the photo