TTLC10P Level Crossing Barrier Set with Light & Sound (OO) Pair MC-Active There is also a 3

There is also a 3 pin harnes to attaches to the Surface Mounted Point Motor but with simple modification it can be fitted to other Solenoid Point Motors

To install these signals onto an existing layout you can cut the prongs off at the dotted lines and solder two wires onto the back of the PCB and run the wires to the power Bus Wires

The Class 220s operate in four-coach sets with a top speed of 125 mph (200 km/h) and a maximum range of approximately 1

and now include directional head- and tail-lights which can be switched on/off at each end independently – on DCC or via the PCB-mounted microswitches when used on analogue – and

5 Amps peak power

TTLC10P Level Crossing Barrier Set with Light & Sound (OO) Pair MC-Active There is also a 3These models of UK style level crossings are pre assembled with both lights and sound and come complete with Peco level crossing barrier and fences (PELK 51) These models are easy to install and connect to a power supply. All you need is a 10mm hole drilled where you want to install them, the model is held in place with a special mounting cap (supplied). To power these light you can either use a 9 16v DC power supply. We recommend a WM4 Wall Mounted